FLOAT
EN FR

Post

Post: the versions of an image

Two versions of the Rosette are kept side by side in one project: Whole field, the picture as it is for a screen view, and Finish, with Dehaze under a luminance mask, Saturation and Multiscale sharpening for full size. The versions are switched, undone, deleted and taken back, exported to their own files and saved.

Table 1.The tutorial at a glance.
DurationAbout 15 min, with no computing
Requirements
  • FLOAT installed
  • The tutorial Repair instead of cropping done: a copy of its finished project (about 2 GB) is the starting point
  • Disk space: about 2 GB for the copy
Data set Rosette Nebula (NGC 2237) · Sony A7S, 15 s at ISO 4000 · 130/900 Newtonian · 436 lights (1.8 h), 48 darks, 62 flats, the authors of FLOAT; size 6.9 GB. The frames will be offered for download; the link will be given here
The export of the Finish version: a darker sky, a more vivid ring and crisper fine structure at full size.
The result. The export of the Finish version: a darker sky, a more vivid ring and crisper fine structure at full size.

1Open the project

On the Home screen click Open project… and choose a copy of the finished project of the tutorial Repair instead of cropping. The project opens up to date: nothing is to be computed.

Expected result. The status bar reads all up to date, and the Run button is greyed.

Open the project
Figure 1.Open the project.

2The diagnosis, before any gesture

Click Post. The picture is the whole field, with round stars to the edges and a sky at 33 to 34. Right, and to leave alone: the field, the stars and the sky neutrality. Three points are to be corrected in a second version, read as in the table; the first version stays as it is. The Version list holds Version 1.

Expected result. The Version list shows one version.

The diagnosis, before any gesture
Figure 2.The diagnosis, before any gesture.
The diagnosis before touching Post.
What is wrongHow it is readWhat corrects it
A veil is left on the sky.The sky is a dark grey that measures 33 to 34 on the exported picture, and the faint edges of the ring do not stand out from it. The aim is about 26.Dehaze on the starless image, under a luminance mask. (step 5)
The ring could be a little more vivid.The red and the pink of the ring are a little pale. The colour of the Rosette is a pink red with magenta: the aim is a little more vividness, not a redder ring.Saturation on the starless image. (step 6)
The fine structure of the gas is soft at full size.At 100 % on the dark globules the folds and the edges are a little soft.Multiscale sharpening on the starless image. (step 6)

3Name the first version

Double-click the name of the version, type Whole field and press Enter: this is the picture as it is, for a screen view.

Why. One version is for a screen view, the other finished for full size, kept side by side in the same project.

Expected result. The Version field reads Whole field.

Name the first version
Figure 3.Name the first version.

4A second version

Click New version: a copy of this one, with its own Undo. Rename it Finish, the version for full size.

Expected result. The status bar says Version 2 is a copy of Version 1 and its own Undo starts here.

A second version
Figure 4.A second version.

5Dehaze under a luminance mask

Click Starless image, then Filter, open Contrast and choose Dehaze. Drag Amount to about 0.25 and Scale to about 256 px. With the filter selected, click the mask button, then Add to mask and Luminance range: set the part from 0 to 25 % with a Feather of about 8 px.

Why. Dehaze takes away a large-scale veil, the residual light of the sky. Without the mask it would also lower the nebula, its brightest 5 % going from 145 to 132; with the mask it acts only on the dark tones.

Expected result. The sky reads about 26 on the exported picture.

Dehaze under a luminance mask
Figure 5.Dehaze under a luminance mask.

6Saturation and Multiscale sharpening

Click Starless image, Filter, Color, Saturation, and drag Strength to about +20 %. Then add Multiscale sharpening from Detail: 4 px to 0.3, 8 px to 0.4 and 16 px to 0.3, the 1 px and 2 px scales left at 0.

Why. Saturation without a mask: the sky, a neutral grey, does not take any colour. The 1 and 2 px scales stay at 0 because they would bring the grain back. On the fitted view the sharpening changes almost nothing: it is for the full-size picture, a print or a viewer who zooms in.

Expected result. Three filters are listed under the starless image.

The dark globules at 100 % before the sharpening.
Before. The dark globules at 100 % before the sharpening.
With 4 px 0.3, 8 px 0.4 and 16 px 0.3: the folds and edges are crisper.
After. With 4 px 0.3, 8 px 0.4 and 16 px 0.3: the folds and edges are crisper.
Saturation and Multiscale sharpening
Figure 6.Saturation and Multiscale sharpening.

7Switch between the versions

Open the Version list and pick Whole field: the picture changes at once, with its own settings. Pick Finish again.

Expected result. Whole field shows no filter under the starless image except the ones it had.

Switch between the versions
Figure 7.Switch between the versions.

8Undo inside a version

Click Undo: it takes back the last change of this version only, here the 16 px value. Click Redo to bring it back.

Expected result. Whole field is untouched by the Undo.

Undo inside a version
Figure 8.Undo inside a version.

9Delete a version and take it back

Click the bin: the version shown is deleted, and the status bar offers it back. Press Ctrl+Z: the version comes back with its settings.

Expected result. The list holds both versions again.

Delete a version and take it back
Figure 9.Delete a version and take it back.

10Export each version to its own file

With Finish shown, click Export…, choose the file with the folder button, choose JPEG and click Export. Pick Whole field in the list and export the second file.

Expected result. The dialog says how many files were written, and where.

Export each version to its own file
Figure 10.Export each version to its own file.

11Save, close and reopen

Press Ctrl+S: both versions are saved with the project. Open File, click Close project, click the project on the Home screen and Post: both versions are still in the list, each with its settings.

Expected result. The list shows Whole field and Finish.

Save, close and reopen
Figure 11.Save, close and reopen.

Blocks used